Interconnecting Cisco Networking Devices Part 2 (ICND2)
Overview: This course focuses on skills and knowledge necessary to install, operate, and troubleshoot a small to medium-size branch office Enterprise network, including configuring several switches and routers, connecting to a WAN and implementing network security.
At Course Completion: Upon completion of this course, you should be able to: - How to configure and troubleshoot a small network - Expanding the switched network from a small LAN to a medium-sized LAN - Use of multiple switches, supporting VLANs, trunking, and spanning tree - Routing concepts as they apply to a medium-sized network - Considerations when implementing routing on the network Technical Features of this course include the following: - VLANs and Trunks - Spanning Tree - Implementing and troubleshooting OSPF and EIGRP routing - Access Control Lists - NAT, PAT and IPv6 Associated Certification: CCNA
|
Prerequisites:
|
Interconnecting Cisco Networking Devices Part 1 (ICND1)
|
|
Outline:
|
Lesson 1: Small Network Implementation
|
Introducing the Review Lab Lab 1-1: Implementing a Small Network (Review Lab)
|
Lesson 2: Medium-Sized Switched Network Construction
|
Implementing VLANs and Trunks Improving Performance with Spanning Tree Routing Between VLANs Securing the Expanded Network Troubleshooting Switched Networks Lab 2-1: Configuring Expanded Switched Networks Lab 2-2: Troubleshooting Switched Networks
|
Lesson 3: Medium-Sized Routed Network Construction
|
Reviewing Routing Operations Implementing VLSM
|
Lesson 4: Single Area OSPF Implementation
|
Implementing OSPF Troubleshooting OSPF Lab 4-1: Implementing OSPF Lab 4-2: Troubleshooting OSPF
|
Lesson 5: EIGRP Implementation
|
Implementing EIGRP Troubleshooting EIGRP Lab 5-1: Implementing EIGRP Lab 5-2: Troubleshooting EIGRP
|
Lesson 6: Access Control Lists
|
Introducing ACL Operation Configuring and Troubleshooting ACLs Lab 6-1: Implementing and Troubleshooting ACLs
|
Lesson 7: Address Space Management
|
Scaling the Network with NAT and PAT Transitioning to IPv6 Lab 7-1: Configuring NAT and PAT Lab 7-2: Implementing IPv6
|
Lesson 8: LAN Extensionin to a WAN
|
Introducing VPN Solutions Establishing a Point-to-Point WAN Connection with PPP Establishing a WAN Connection with Frame Relay Troubleshooting Frame Relay WANs Lab 8-1: Establishing a Frame Relay WAN Lab 8-2: Troubleshooting Frame Relay WANs
|